Cisco 200-301 Real Exam Questions and Answers FREE
Exam Dumps 200-301 Practice Free Latest Cisco Practice Tests
To prepare for the Cisco 200-301 exam, you can take advantage of the various study materials provided by Cisco, including books, online courses, and practice exams. It is essential to devote enough time and effort to studying for 200-301 exam to ensure that you are fully prepared to pass it. Passing the Cisco 200-301 exam is an excellent way to boost your career prospects in the networking field and gain recognition for your skills and knowledge.
Basics of Network Access
Network access covers the concepts of VLAN configuration and verification, interswitch connectivity verification and configuration, the configuration and verification of Layer 2 discovery protocols, and Cisco wireless architectures. It also addresses the configuration of wireless LAN components, WLC, and AP management access connections, and physical infrastructure connections of WLAN components.
Cisco 200-301 exam is a challenging exam that requires a deep understanding of networking concepts and technologies. 200-301 exam is designed to test the candidates' ability to configure, troubleshoot, and manage networks. 200-301 exam covers a wide range of topics, including network protocols, routing and switching, wireless networking, network security, and network automation. Candidates who pass the Cisco 200-301 exam are awarded the CCNA certification, which is a valuable credential in the IT industry.
NEW QUESTION # 519
Which IPv6 address block sends packets to a group address rather than a single address?
- A. FF00::/8
- B. FE80::/10
- C. 2000::/3
- D. FC00::/7
Answer: A
Explanation:
Section: Network Fundamentals
Explanation:
FF00::/8 is used for IPv6 multicast and this is the IPv6 type of address the question wants to ask.
FE80::/10 range is used for link-local addresses. Link-local addresses only used for communications within the local subnetwork (automatic address configuration, neighbor discovery, router discovery, and by many routing protocols). It is only valid on the current subnet. It is usually created dynamically using a link-local prefix of FE80::/10 and a 64-bit interface identifier (based on 48-bit MAC address).
NEW QUESTION # 520
What are two characteristics of a public cloud Implementation? (Choose two.)
- A. It is owned and maintained by one party, but it is shared among multiple organizations.
- B. It provides services that are accessed over the Internet.
- C. It Is a data center on the public Internet that maintains cloud services for only one company.
- D. It enables an organization to fully customize how It deploys network resources.
- E. It supports network resources from a centralized third-party provider and privately-owned virtual resources
Answer: C
Explanation:
Refer to the exhibit.
NEW QUESTION # 521
Which command enables a router to become a DHCP client?
- A. ip address dhcp
- B. ip helper-address
- C. ip dhcp client
- D. ip dhcp pool
Answer: A
Explanation:
Reference:
If we want to get an IP address from the DHCP server on a Cisco device, we can use the command "ip address dhcp".
Note: The command "ip helper-address" enables a router to become a DHCP Relay Agent.
NEW QUESTION # 522
What is the default behavior of a Layer 2 switch when a frame with an unknown destination MAC address is received?
- A. The Layer 2 switch forwards the packet and adds the destination MAC address to its MAC address table
- B. The Layer 2 switch floods packets to all ports except the receiving port in the given VLAN.
- C. The Layer 2 switch sends a copy of a packet to CPU for destination MAC address learning.
- D. The Layer 2 switch drops the received frame
Answer: B
Explanation:
If the destination MAC address is not in the CAM table (unknown destination MAC address), the switch sends the frame out all other ports that are in the same VLAN as the received frame. This is called flooding. It does not flood the frame out the same port on which the frame was received.
NEW QUESTION # 523
which frame type allows STP to compute the spanning-tree topology?
- A. LSA
- B. LSP
- C. BPDU
- D. RSTP
Answer: C
NEW QUESTION # 524
Drag and drop the Rapid PVST+ forwarding state actions from the left to the right. Not all actions are used.
Answer:
Explanation:
NEW QUESTION # 525
Refer to the exhibit. Load-balanced traffic is coming in from the WAN destined to a host at
172.16.1.190. Which next-hop is used by the router to forward the request?
- A. 192.168.7.40
- B. 192.168.7.35
- C. 192.168.7.4
- D. 192.168.7.7
Answer: B
NEW QUESTION # 526
Refer to the exhibit.
Which switch in this configuration will be elected as the root bridge?
- A. SW3
- B. SW1
- C. SW4
- D. SW2
Answer: A
NEW QUESTION # 527
In software-defined architecture, which place handles switching for traffic through a Cisco router?
- A. Data
- B. Management
- C. Control
- D. application
Answer: A
Explanation:
Explanation
Data plane-Handles all the data traffic. The basic functionality of a Cisco NX-OS device is to forward packets from one interface to another. The packets that are not meant for the switch itself are called the transit packets. These packets are handled by the data plane
NEW QUESTION # 528
Refer to Exhibit. Which action do the switches take on the trunk link?
- A. The trunk does not form and the ports go into an err-disabled status.
- B. The trunk does not form, but VLAN 99 and VLAN 999 are allowed to traverse the link.
- C. The trunk forms but VLAN 99 and VLAN 999 are in a shutdown state.
- D. The trunk forms but the mismatched native VLANs are merged into a single broadcast domain.
Answer: B
NEW QUESTION # 529
Refer to the exhibit.
Which command must be executed for Gi1.1 on SW1 to become a trunk port if Gi1/1 on SW2 is configured in desirable or trunk mode?
- A. switchport mode dynamic desirable
- B. switchport mode dot1-tunnel
- C. switchport mode trunk
- D. switchport mode dynamic auto
Answer: D
NEW QUESTION # 530
Drag and drop the IPv6 addresses from the left onto the corresponding address types on the right.
Answer:
Explanation:
NEW QUESTION # 531
Refer to the exhibit.
Which next-hop IP address does Routed use for packets destined to host 10 10.13.158?
- A. 10.10.10.9
- B. 10.10.10.5
- C. 10.10.11.2
- D. 10.10.12.2
Answer: B
NEW QUESTION # 532
Refer to the exhibit.
An engineer assumes a configuration task from a peer Router A must establish an OSPF neighbor relationship with neighbor 172 1 1 1 The output displays the status of the adjacency after 2 hours. What is the next step in the configuration process for the routers to establish an adjacency?
- A. Configure a point-to-point link between router A and router B.
- B. Set the router B OSPF ID to the same value as its IP address
- C. Set the router B OSPF ID to a nonhost address.
- D. Configure router A to use the same MTU size as router B.
Answer: C
NEW QUESTION # 533
Drag and drop the attack-mitigation techniques from the left onto the Types of attack that they mitigate on the right.
Answer:
Explanation:
NEW QUESTION # 534
......
Verified 200-301 Exam Dumps Q&As - Provide 200-301 with Correct Answers: https://examsboost.dumpstorrent.com/200-301-exam-prep.html