Valid CCNP Security 300-710 Dumps Ensure Your Passing
300-710 Dumps Real Exam Questions Test Engine Dumps Training
Cisco Firepower technology is a comprehensive security solution that provides advanced threat detection and protection capabilities. It enables security professionals to monitor network traffic, detect and prevent security threats, and respond to security incidents in real-time. The Cisco Firepower NGFW and FMC are key components of this solution, providing a unified platform for network security management.
NEW QUESTION # 63
An engineer configures a network discovery policy on Cisco FMC. Upon configuration, it is noticed that excessive and misleading events filing the database and overloading the Cisco FMC. A monitored NAT device is executing multiple updates of its operating system in a short period of time. What configuration change must be made to alleviate this issue?
- A. Leave default networks.
- B. Change the method to TCP/SYN.
- C. Increase the number of entries on the NAT device.
- D. Exclude load balancers and NAT devices.
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Network_Discovery_Policies.html
NEW QUESTION # 64
After using Firepower for some time and learning about how it interacts with the network, an administrator is trying to correlate malicious activity with a user Which widget should be configured to provide this visibility on the Cisco Firepower dashboards?
- A. Correlation Events
- B. Current Sessions
- C. Custom Analysis
- D. Current Status
Answer: C
NEW QUESTION # 65
A network administrator reviews the file report for the last month and notices that all file types, except exe. show a disposition of unknown. What is the cause of this issue?
- A. A file policy has not been applied to the access policy.
- B. The Cisco FMC cannot reach the Internet to analyze files.
- C. Only Spero file analysis is enabled.
- D. The malware license has not been applied to the Cisco FTD.
Answer: D
NEW QUESTION # 66
A company wants a solution to aggregate the capacity of two Cisco FTD devices to make the best use of resources such as bandwidth and connections per second. Which order of steps must be taken across the Cisco FTDs with Cisco FMC to meet this requirement?
- A. Configure the Cisco FTD interfaces, add members to FMC, configure cluster members in FMC, and create cluster in Cisco FMC.
- B. Add members to the Cisco FMC, configure Cisco FTD interfaces, create the cluster in Cisco FMC, and configure cluster members in Cisco FMC.
- C. Add members to Cisco FMC, configure Cisco FTD interfaces in Cisco FMC. configure cluster members in Cisco FMC, create cluster in Cisco FMC. and configure cluster members in Cisco FMC.
- D. Configure the Cisco FTD interfaces and cluster members, add members to Cisco FMC. and create the cluster in Cisco FMC.
Answer: B
NEW QUESTION # 67 
Refer to the exhibit. An engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network. How is the Firepower configuration updated to protect these new operating systems?
- A. The administrator requests a Remediation Recommendation Report from Cisco Firepower.
- B. Cisco Firepower automatically updates the policies.
- C. The administrator manually updates the policies.
- D. Cisco Firepower gives recommendations to update the policies.
Answer: D
Explanation:
Section: Management and Troubleshooting
NEW QUESTION # 68
An engineer must deploy a Cisco FTD device. Management wants to examine traffic without requiring network changes that will disrupt end users. Corporate security policy requires the separation of management traffic from data traffic and the use of SSH over Telnet for remote administration. How must the device be deployed to meet these requirements?
- A. in routed mode with a diagnostic interface
- B. in transparent made with a data interface
- C. in routed mode with a bridge virtual interface
- D. in transparent mode with a management Interface
Answer: D
Explanation:
Explanation
To deploy a Cisco FTD device that meets the requirements of the question, the engineer must use transparent mode with a management interface. Transparent mode is a firewall configuration in which the FTD device acts as a "bump in the wire" or a "stealth firewall" and is not seen as a router hop to connected devices. In transparent mode, the FTD device can examine traffic without requiring network changes that will disrupt end users, such as changing IP addresses or routing configurations1. A management interface is a dedicated interface that is used for managing the FTD device and separating management traffic from data traffic. A management interface can be configured to allow SSH access for remote administration, which is more secure than Telnet2.
The other options are incorrect because:
Routed mode is a firewall configuration in which the FTD device acts as a router and performs address translation and routing for connected networks. Routed mode requires network changes that may disrupt end users, such as changing IP addresses or routing configurations1. A diagnostic interface is a special interface that is used for troubleshooting and capturing traffic on the FTD device. A diagnostic interface does not separate management traffic from data traffic or allow SSH access for remote administration.
Transparent mode with a data interface does not meet the requirement of separating management traffic from data traffic. A data interface is a regular interface that is used for passing and inspecting traffic on the FTD device. A data interface does not allow SSH access for remote administration2.
Routed mode with a bridge virtual interface (BVI) does not meet the requirement of examining traffic without requiring network changes that will disrupt end users. A BVI is a logical interface that acts as a container for one or more physical or logical interfaces that belong to the same layer 2 broadcast domain. A BVI allows the FTD device to route between different bridge groups on the same security module/engine. However, routed mode still requires network changes that may disrupt end users, such as changing IP addresses or routing configurations.
NEW QUESTION # 69
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 70
An engineer is tasked with deploying an internal perimeter firewall that will support multiple DMZs Each DMZ has a unique private IP subnet range. How is this requirement satisfied?
- A. Deploy the firewall in transparent mode with NAT configured.
- B. Deploy the firewall in transparent mode with access control policies.
- C. Deploy the firewall in routed mode with access control policies.
- D. Deploy the firewall in routed mode with NAT configured.
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa96/configuration/general/asa-96-general-config/intro-fw.h
NEW QUESTION # 71
Which limitation applies to Cisco FMC dashboards in a multi-domain environment?
- A. Child domains have access to only a limited set of widgets from ancestor domains.
- B. Child domains are not able to view dashboards that originate from an ancestor domain.
- C. Child domains are able to view but not edit dashboards that originate from an ancestor domain.
- D. Only the administrator of the top ancestor domain is able to view dashboards.
Answer: B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Using_Dashboards.html
NEW QUESTION # 72
A network administrator is troubleshooting access to a website hosted behind a Cisco FTD device External clients cannot access the web server via HTTPS The IP address configured on the web server is 192 168 7.46 The administrator is running the command capture CAP interface outside match ip any 192.168.7.46 255.255.255.255 but cannot see any traffic in the capture Why is this occurring?
- A. The FTD has no route to the web server.
- B. The capture must use the public IP address of the web server.
- C. The packet capture shows only blocked traffic
- D. The access policy is blocking the traffic.
Answer: B
NEW QUESTION # 73
When creating a report template, how can the results be limited to show only the activity of a specific subnet?
- A. Create a custom search in Firepower Management Center and select it in each section of the report.
- B. Select IP Address as the X-Axis in each section of the report.
- C. Add a Table View section to the report with the Search field defined as the network in CIDR format.
- D. Add an Input Parameter in the Advanced Settings of the report, and set the type to Network/IP.
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firesight/541/user-guide/FireSIGHT-System- UserGuide-v5401/Reports.html#87267
NEW QUESTION # 74
A network administrator is deploying a Cisco IPS appliance and needs it to operate initially without affecting traffic flows.
It must also collect data to provide a baseline of unwanted traffic before being reconfigured to drop it. Which Cisco IPS mode meets these requirements?
- A. failsafe
- B. promiscuous
- C. inline tap
- D. bypass
Answer: B
NEW QUESTION # 75
Which group within Cisco does the Threat Response team use for threat analysis and research?
- A. Cisco Talos
- B. OpenDNS Group
- C. Cisco Network Response
- D. Cisco Deep Analytics
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/products/security/threat-response.html#~benefits
NEW QUESTION # 76
What is the difference between inline and inline tap on Cisco Firepower?
- A. Inline mode can drop malicious traffic.
- B. Inline tap mode does full packet capture.
- C. Inline tap mode can send a copy of the traffic to another device.
- D. Inline mode cannot do SSL decryption.
Answer: A
NEW QUESTION # 77
What is a functionality of port objects in Cisco FMC?
- A. to mix transport protocols when setting both source and destination port conditions in a rule
- B. to represent protocols other than TCP, UDP, and ICMP
- C. to represent all protocols in the same way
- D. to add any protocol other than TCP or UDP for source port conditions in access control rules.
Answer: B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/reusable_objects.html
NEW QUESTION # 78
Which command must be run to generate troubleshooting files on an FTD?
- A. show tech-support
- B. system generate-troubleshoot all
- C. sudo sf_troubleshoot.pl
- D. system support view-files
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/security/sourcefire-defense-center/117663-technote- SourceFire-00.html
NEW QUESTION # 79
An organization is implementing Cisco FTD using transparent mode in the network. Which rule in the default Access Control Policy ensures that this deployment does not create a loop in the network?
- A. ARP inspection is enabled by default.
- B. STP BPDU packets are allowed by default.
- C. Multicast and broadcast packets are denied by default.
- D. ARP packets are allowed by default.
Answer: C
NEW QUESTION # 80
What must be implemented on Cisco Firepower to allow multiple logical devices on a single physical device to have access to external hosts?
- A. Define VLAN subinterfaces for each logical device.
- B. Set up a cluster control link between all logical devices
- C. Add one shared management interface on all logical devices.
- D. Add at least two container instances from the same module.
Answer: C
NEW QUESTION # 81
......
How much Securing Networks with Cisco Firepower (300-710 SNCF) Exam Cost
The cost of this exam is USD $300 but prices for Cisco examinations differ according to level and currency. Also exam vouchers can be used for discounts. To find out the cost of your test, click here and choose your country. To learn about prices and locations, visit the CCIE Lab Exam page
Passing the Cisco 300-710 exam can help professionals demonstrate their expertise in network security and improve their job prospects. Securing Networks with Cisco Firepower certification is recognized by many organizations as a valuable credential for security professionals, and it can open up new opportunities for career advancement and higher salaries.
Cisco 300-710: Selling CCNP Security Products and Solutions: https://examsboost.dumpstorrent.com/300-710-exam-prep.html