Mar-2022 Huawei H31-341-ENU Actual Questions and Braindumps
H31-341-ENU Dumps To Pass Huawei Exam in 24 Hours - DumpsTorrent
Get to know about the Objective of Huawei H31-341 Certification
The Huawei H31-341 certification offers you an opportunity to validate your skills. This certification is essentially designed to assess your skills related to the Huawei HiLTE. The more you study technology-related subjects, the more value you will add to your resume. In case you are studying for a real Huawei H31-341 exam, it is essential that you take up practice questions. H31-341 Dumps can help you prepare for the exam in the most effective manner. Regular basis updates are given to our customers so that you can be updated with the new questions and answers. Huawei H31-341 exam is one of the most essential elements for acquiring any type of IT certification. It helps you to validate your skills. It will help you to take up a good career in IT. You will be required to take up comprehensive knowledge related to the Huawei HiLTE and understand its features and designs.
If you successfully clear this exam, it will help you to get a good career in IT. Today, this certification is being accepted by many top companies. The Huawei H31-341 certificate will also help you to get an interview with these companies. Once you work with them, you will face a good future.
NEW QUESTION 75
The following description of the cross-board of the OSN 8800 T64 subrack. Which is correct? (Multiple choice)
- A. Enhanced subrack can only be configured with UXCT+USXM or UXCT+USXH
- B. XCT+SXM can be used together to provide an ODUK crossover with a total capacity of 2.56 Tbit/s.
- C. XCT+SXM can support ODU0, 1, 2, and 3 levels of crossover.
- D. XCT+SXM can be regarded as a whole when working. If any faulty, the two boards will be switched together.
Answer: A,B,C,D
NEW QUESTION 76
The length range of the DATA field in the Ethernet frame structure is ().
- A. 46-1518 bytes
- B. 64-1500 bytes
- C. 46-1500 bytes
- D. 64-1518 bytes
Answer: C
NEW QUESTION 77
In WDM systems, when using less than () wavelength, it is ideal to use dielectric thin film filter (TFF).
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 78
In the scenario where the non-convergence OTU processes OTN standard signals, both A and B are WDM sites.The OTU at station A accesses four channels of R_LOS signals on the client side. After being processed in the middle part and on the WDM side of the OTU at station A, the alarm signals are then sent to station B.
The ODUk_PM_AIS alarm of the corresponding channel is generated in the middle part of station B.
The ODUk_PM_AIS alarm is detected in the client device.
- A. False
- B. True
Answer: A
NEW QUESTION 79
Daily equipment maintenance items, excluding:
- A. Check device sound alarms
- B. Check the cabinet and board indicators
- C. Check the fan box and clean the air filter
- D. Check the room temperature, humidity and cleanliness
Answer: C
NEW QUESTION 80
The following description of the use of synchronous methods to create fiber optics, which is wrong?
- A. Collision fiber refers to the fiber that is configured on the network element side and is inconsistent with the configuration on the network management side.
- B. The fiber exists on the network management side and the network element side, and the fiber with the same information is not required to be created.
- C. The existence of a conflicting fiber does not affect the configuration of the path, so it can be ignored.
- D. If there is a fiber that is not created on the U2000 or a fiber that is not created on the network element, you need to synchronize or create it.
Answer: C
NEW QUESTION 81
When creating an electric layer path, one RX/TX port can only establish a connection with one optical channel of the clientLP port.
- A. FALSE
- B. TRUE
Answer: A
NEW QUESTION 82
Which of the following is not a PW APS switching condition?
- A. MPLS_PW_SF
- B. A warm reset is performed on the board.
- C. A cold reset is performed on the board.
- D. The board software is faulty.
Answer: C
NEW QUESTION 83
Which of the following is the data that needs to be collected and saved in the event of a failure? (Multiple Choice)
- A. Configuration data of the NE and the board
- B. Running status data of the NE and the board
- C. Equipment alarms and performance events
- D. Operation log of the network management
Answer: A,B,C,D
NEW QUESTION 84
The basic principles of STP device fault location are? (Multiple choice)
- A. First low speed, then high speed
- B. First advanced, then low level
- C. First network, then network element
- D. First external, then transfer
Answer: B,C,D
NEW QUESTION 85
After the signal of the standard Ethernet frame length of 64 Bytes is connected to the Ethernet board, if the QinQ function is enabled, what is the actual frame length of the signal inside the board?
- A. 68 Bytes
- B. 84 Bytes
- C. 80 Bytes
- D. 64 Bytes
Answer: A
NEW QUESTION 86
Which of the following boards can be inserted on the OSN 9800 U64 subrack?
- A. TN18LSC
- B. TN54GS4
- C. TNV1N401
- D. TNF 5UNQ2
Answer: B
NEW QUESTION 87
The following description of the Flexible ROADM, which is wrong?
- A. WSMD2 board supports F1exible ROADM configuration
- B. Flexible grid technology provides flexible bandwidth settings and flexible bandwidth allocation and scheduling.
- C. Improve spectrum utilization and meet flexible scheduling requirements in the future era of over 100 Gbit/= rate.
- D. DFlexible ROADM is compatible with existing networks
Answer: A
NEW QUESTION 88
The OCh path is created using the single station method. After the creation is completed, the 0ch path is not searched. Which are the possible reasons? (Multiple choice)
- A. Missing logical fiber between sites
- B. Line attenuation is too large
- C. Inconsistent wavelengths of the line boards at both ends of the source and sink
- D. errors in source and sink ports in the site
Answer: A,C
NEW QUESTION 89
In the ROADM, which of the following layer of OTN paths do not need to be manually configured, it can be obtained directly by path search? (Multiple Choice)
- A. OCh
- B. OSC
- C. OMS
- D. OTS
Answer: A,B,C,D
NEW QUESTION 90
The lower the noise figure of the amplifier, the less noise is introduced by this amplifier.
- A. TRUE
- B. FALSE
Answer: A
NEW QUESTION 91
Which of the following description of 1+1 optical line protection is wrong?
- A. The switching mode defaults to double-ended switching
- B. The switching method defaults to non-recovery
- C. The primary and secondary input lights initial difference defaults to 0.
- D. The active and standby input light difference defaults to 5dB.
Answer: C
NEW QUESTION 92
Which of the following is not a function of RSVP-TE?
- A. LSP deletion
- B. LSP rerouting
- C. LSP path optimization
- D. Establish neighbor relationship
Answer: D
NEW QUESTION 93
The overhead ratio is a factor that affects the error correction capability of FEC technology. Generally, under the same FEC encoding/decoding algorithm, the higher the overhead ratio, the greater the net coding benefit.
- A. TRUE
- B. FALSE
Answer: A
NEW QUESTION 94
Which of the following description of the Optix OSN 9800 sub-rack is correct? (Multiple choice)
- A. When the OSN 9800 Universal Platform Sub-rack is used as a slave sub-rack, the main control board must be placed.
- B. The OSN 9800 U16 sub-rack has a total of 16 service slots. These slots have the same capacity and support up to 400 bit/s ODUk crossover in a single slot.
- C. In the OSN 980 0U32 sub-rack, IU70 is the primary CTU and IU78 is the standby CTU.
- D. The service board can be inserted into the IU18 slot only when the OSN 9800 P18 is used as the slave sub-rack.
Answer: B,D
NEW QUESTION 95
......
Get to know about the Best Solution for the preparation of Huawei H31-341 Exam
We provide the best Huawei H31-341 certification exam questions that can be prepared in a short period of time. Hence, we give you an opportunity to understand Huawei HiLTE in a short period of time. Our experts give you the best solution for the preparation for the Huawei HiLTE certification exam. They explain all topics in detail to you. It is easy to prepare for this exam if you take up our Huawei HiLTE practice questions. The explanations given by our experts are also very good. H31-341 Dumps will help you to understand the different types of questions that may come up in the actual Huawei HiLTE exam. You may try some free demo questions of the Huawei H31-341 exam to understand different types of questions that may come up in the actual Huawei HiLTE exam. You can also buy Huawei HiLTE exam products if you need to take this exam.
We give you an opportunity to take the sample exam tests. These sample exam questions are very good. You can get to know different types of questions that may come up in the actual Huawei HiLTE exam. If you need any clarification related to H31-341 PDF practice test, all you need to do is contact us. We are available 24/7 at your service. You can check out our customer support portal for more information related to Huawei HiLTE. You can also take up the free demo of Huawei HiLTE to understand the format of the actual exam.
Download the Latest H31-341-ENU Dump - 2022 H31-341-ENU Exam Question Bank: https://examsboost.dumpstorrent.com/H31-341-ENU-exam-prep.html