Exam SMI300XE Realistic Dumps Verified Questions Free [May 12, 2025]
Valid SMI300XE Dumps for Helping Passing Supermicro Exam!
NEW QUESTION # 10
What is the executable file extension used in Windows for SUM?
- A. .txt
- B. .sh
- C. binary
- D. .exe
Answer: D
Explanation:
This question is a duplicate ofQuestion No. 20. The correctWindows executable file extension for SUM is .
exe.
* Option A (Correct):SUM on Windows is executed using .exe.
* Option B (Incorrect):.sh is a script file format for Linux, not Windows.
* Option C (Incorrect):.txt files contain textand cannot execute commands.
* Option D (Incorrect):"binary" is not a valid file extension for SUM execution on Windows.
NEW QUESTION # 11
What information is useful for identifying system issues and their timing?
- A. Event log
- B. Subnet Mask
- C. GPU memory specification
- D. Last login attempt
Answer: A
Explanation:
Theevent logis the primary source of information for identifyingsystem issues and their exact timing. The IPMI event logrecords all critical system alerts, includinghardware failures, temperature warnings, power issues, and other critical errors.
* Option A (Incorrect):GPU memory specifications do not provide issue tracking information.
* Option B (Correct):Theevent log tracks all system events and errors, making it essential for troubleshooting.
* Option C (Incorrect):Subnet masks relate to network configurations and do not provide system issue tracking.
* Option D (Incorrect):Last login attempts show security logs but arenot related to hardware or system issues.
NEW QUESTION # 12
Which two situations could occur if you forcefully shift the release lever without first unlocking the red lock?(Choose 2 answers.)
- A. All the answers are correct.
- B. The power supply unit will fail.
- C. You could permanently damage the lock on the power supply unit.
- D. The power supply unit can no longer be secured into the tray.
Answer: B,C
Explanation:
ForSupermicro MI300X GPU systems,removing the power supply unit (PSU) improperlycan lead to serious issues.
* Why the red lock exists?
* Thered locking mechanismensures that thePSU is properly securedin the system.
* Before disengaging the PSU, thered lock must first be unlockedto avoid damage.
* If you forcefully shift the release lever without unlocking the red lock:
* B: The power supply unit will fail# If the PSU is removed improperly, it can causeinternal damageto power connectors, resulting in PSUfailure or improper functioning.
* C: You could permanently damage the lock on the power supply unit# Thelocking mechanismis designed for smooth disengagement. Forcefully shifting the lever canbreak or warpthe lock, making itimpossible to secure the PSU back in place.
* Incorrect Answers Explained:
* A (All answers are correct)# This is incorrect becausenot all answers are valid.
* D (The PSU can no longer be secured into the tray)# This happensonly if the lock is damaged
, which is covered underoption C.
Supermicro's official documentation clearly statesthatunlocking the red lock firstis a critical step before removing or replacing the PSU.
NEW QUESTION # 13
Which SUM command is used to verify the AOC NIC installed on the system?
- A. sum.exe -i 10.1.1.100 -u ADMIN -p ADMIN -c getaocinfo
- B. sum.exe-read all AOC-from 10.1.1.100
- C. sum.exe -i 10.1.1.100 -u ADMIN -p ADMIN -c getaocnicinfo
- D. sum.exe -ip 10.1.1.100 -user ADMIN -pass ADMIN -command getnicinfo
Answer: A
Explanation:
Toverify the AOC NIC installedon the system, the correctSUM (Supermicro Update Manager) command is:
css
CopyEdit
sum.exe -i 10.1.1.100 -u ADMIN -p ADMIN -c getaocinfo
* Option B (Correct):This command retrievesAOC NIC information.
* Option A (Incorrect):"getaocnicinfo" isnot a valid command.
* Option C (Incorrect):This syntax isincorrect and will not execute properly.
* Option D (Incorrect):"getnicinfo" retrievesgeneral NIC details, not AOC NIC-specific information.
NEW QUESTION # 14
In which directory should the AGFHC tool be installed for it to function properly in Ubuntu?
- A. Directory - /windows/user/desktop
- B. Directory - /tmp/amd/AGFHC/files
- C. Directory - /opt/AMD/AGFHC
- D. Directory - /usr/home/customer/AGFHC
Answer: C
Explanation:
TheAGFHC tool for Ubuntumust be installed in the/opt/AMD/AGFHCdirectory.
* Option A (Incorrect):The/tmp/directory istemporary storageand is not used forapplication installations.
* Option B (Incorrect):/windows/user/desktopis a Windows path and does not apply to Linux-based Ubuntu.
* Option C (Incorrect):/usr/home/customer/AGFHCis not the correct standard directory for system- wide software.
* Option D (Correct):/opt/AMD/AGFHCis the correct directory for installing AMD-related tools in Ubuntu.
NEW QUESTION # 15
The syntax and options for the SUM command differ between Windows and Linux.
- A. True
- B. False
Answer: A
Explanation:
TheSUM (Supermicro Update Manager) commandhas differentsyntax and optionsbetweenWindows and Linuxversions.
* OnWindows, the SUM command uses .exe files and standard Windows CLI syntax.
* OnLinux, SUM commands use native Linux paths, shell scripting, and different argument formatting.
For example:
* Windows:sum.exe -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
* Linux:./sum -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
Since syntax differs,the correct answer is True.
NEW QUESTION # 16
When removing the GPU tray, where are the two screws located that must be loosened to allow the handles to be pulled out/down?
- A. One on top and one on bottom of the GPU tray
- B. Bottom of the GPU tray
- C. Top of the GPU tray
- D. One on each side of the GPU tray
Answer: D
Explanation:
Toremove the GPU tray, you need toloosen two screwslocatedone on each side of the tray.
* Option B (Correct):There isone screw on each sidethat must beloosenedbefore pulling the handles out
/down.
* Option A (Incorrect):The screwsare not only on the top.
* Option C (Incorrect):The screwsare not only on the bottom.
* Option D (Incorrect):Thereis no screw configurationwithone on top and one on the bottom.
NEW QUESTION # 17
The AGFHC Tool is intended for use exclusively by specific users. Who are those users? Choose 2 answers.
- A. Internal SMC Employees
- B. SMC Partners
- C. Customers
- D. VARs / Resellers
Answer: A,D
Explanation:
TheAGFHC Toolis specifically designed forSupermicro's internal employeesandauthorized resellers (VARs). These users require access to diagnostic and firmware update tools that are restricted totrained personnel.
* Option A (Correct):Internal Supermicro employeesuse this tool for system maintenance and diagnostics.
* Option D (Correct):VARs (Value-Added Resellers)are authorized to use the tool forcustomer support and system integration.
* Option B (Incorrect):GeneralSMC partners do not have accessto AGFHC.
* Option C (Incorrect):End customers do not have accessto this tool.
NEW QUESTION # 18
What is the correct syntax for the AGFHC command to run recipes?
- A. ./agchf-r alljvll.yml
- B. /agfhc -t -a alljvll.yml
- C. agfhc.exe -r-s alljvll.yml
- D. ./agfhc -r alljvll.yml
Answer: D
Explanation:
The correct syntax for running recipes using theAGFHC toolis:
bash
CopyEdit
/agfhc -r alljvll.yml
This command runsa specified YAML recipe file (alljvll.yml)using the AGFHC tool in aLinux-based system.
* Option A (Incorrect):Contains an incorrect flag (-r should be separated).
* Option B (Incorrect):Uses incorrect flag format (-t -a), which is not part of AGFHC syntax.
* Option C (Incorrect):Uses Windows-style .exe format, which is incorrect for Linux.
* Option D (Correct):This follows thecorrect AGFHC syntaxfor running recipes in a Linux environment.
NEW QUESTION # 19
What tool is needed to remove the GPU in the MI300X system?
- A. Security Torx Bit
- B. Phillips Head Screwdriver
- C. T20 Torx Bit
- D. T15 Torx Bit
Answer: D
Explanation:
TheGPU in the MI300X systemis secured withT15 Torx screws, requiring aT15 Torx Bitfor removal.
* Option A (Incorrect):T20 Torx Bit istoo largefor GPU screws.
* Option B (Incorrect):Security Torx Bit isnot requiredfor standard GPU removal.
* Option C (Correct):T15 Torx Bit is the correct toolfor removing GPU screws.
* Option D (Incorrect):Phillips Head Screwdriversdo not fit the GPU screws.
NEW QUESTION # 20
When you first access the IPMI Web GUI, you will be prompted to log in. Where can you find the password?
- A. Use the system model number as the password.
- B. It will be on the label on the bottom of the system.
- C. It will be on the tag next to the I/O Module.
- D. It will be on the label on the bottom side of the system cover.
Answer: D
Explanation:
Supermicro ships systems with aunique BMC passwordfor security purposes. Thispassword is printed on a label located on the bottom side of the system cover.
* Option A (on the I/O module tag)is incorrect as the tag typically containsnetwork interface informationrather than credentials.
* Option B (using the system model number as a password)is incorrect because Supermicrodoes not use default passwords based on the model number.
* Option C (on the bottom of the system)is close but not precise;the correct location is the bottom side of the system cover.
* Option D (label on the bottom side of the system cover)is correct, as stated in theSupermicro IPMI and BMC login documentation.
Security Recommendation:Upon first login,Supermicro strongly recommends changing the default BMC password immediatelyfor security reasons.
NEW QUESTION # 21
When replacing a failed GPU, what is the proper torque driver setting for tightening the GPU screws?
- A. 9.5 in-lbf
- B. 4.2 in-lbf
- C. 5.3 Nm
- D. 6-8 in-lbf
Answer: D
Explanation:
Thecorrect torque setting for GPU screwsin anMI300X systemis6-8 in-lbf. This ensures asecure fit without overtightening, which could damage the GPU.
* Option C (Correct):6-8 in-lbf isthe recommended torquefor securing GPU screws.
* Option A (Incorrect):4.2 in-lbf istoo low, leading to loose screws.
* Option B (Incorrect):9.5 in-lbf istoo high, risking damage to the GPU mounting.
* Option D (Incorrect):5.3 Nm isnot used for GPU mounting screws.
NEW QUESTION # 22
If a GPU is not detected in the IPMI GUI reports, what would be the next step to recover the missing GPU?
- A. Press the GPU button on the rear of the server for 5 seconds to reinitialize the GPU tray.
- B. Turn off the server and reseat the motherboard tray.
- C. While powered on, remove the GPU tray, and remove all power connectors and fan connectors from the baseboard and then reseat the connectors.
- D. Turn off the server, then try reseating the GPU and heatsink, turn on the server, and verify in IPMI GUI that the GPU has returned.
Answer: D
Explanation:
When a GPU is not detected in theIPMI GUI reports, the recommended recovery method is topower off the system, reseat the GPU and heatsink, then power it back on and check the IPMI GUI for detection. This process ensures that the GPU is properly connected and making full contact with the system board.
* Option A (pressing a GPU button for 5 seconds)is incorrect because there is no dedicated reinitialization button for GPU detection in Supermicro MI300X systems.
* Option B (removing the GPU tray while powered on)is not advisable as it could cause damage to components.
* Option D (reseating the motherboard tray)is unnecessary, as the issue is likely limited to GPU connectivity rather than a full system board issue.
* Option C (powering off the system, reseating the GPU, and verifying in IPMI GUI)follows proper troubleshooting guidelines as documented in Supermicro'stroubleshooting and system health monitoring sections.
NEW QUESTION # 23
......
SMI300XE Exam Dumps For Certification Exam Preparation: https://examsboost.dumpstorrent.com/SMI300XE-exam-prep.html