Best Quality NACE NACE-CIP1-001 Exam Questions DumpsTorrent Realistic Practice Exams [2023]
Critical Information To Coating Inspector Level 1 Pass the First Time
NACE-CIP1-001 exam is a certification program offered by the National Association of Corrosion Engineers (NACE) for professionals who work in the field of coating inspection. NACE-CIP1-001 exam is designed to test the knowledge and skills of coating inspectors at the entry level, and it is a valuable credential for those who wish to advance their careers in this field.
NEW QUESTION # 42
What is the minimum recommended distance away from an edge that an inspector should take a measurement with a dial-type magnetic pull-off Dry Film Thickness (DFT) gauge?
- A. 6.35 cm (2.5 inch)
- B. 2.5 millimeters (.10 inch)
- C. 2.5 cm (1 inch)
- D. 1 cm (.39 inch)
Answer: C
NEW QUESTION # 43
Good records can provide maintenance departments with detailed information about ALL of the following EXCEPT
- A. how the item was coated.
- B. what items were coated.
- C. what materials were used.
- D. when the coating will be reapplied.
Answer: A
NEW QUESTION # 44
Using SSPC Vis 1 as a guide when performing a visual inspection of a steel surface prior to surface preparation a NACE Inspector would assign which designations to the surface condition:
- A. Rust Grades 1-4
- B. Rust Grades A-D
- C. Surface Conditions E-G
- D. Surface Condition H
Answer: B
NEW QUESTION # 45
When using the ISO comparator in accordance with ISO 8503, if the surface profile does not directly compare to one of the four segments the inspector should:
- A. Record the segment with the less aggressive profile
- B. Record the segment with the more aggressive profile
- C. Use another method as the comparator method is too subjective
- D. Record your result by identifying two segments
Answer: A
NEW QUESTION # 46
Non Conformance Reports are completed by the Inspector:
- A. When the Inspector deems it to be a significant non-conforming item
- B. In accordance with the specification's definition of a non-conformance
- C. When the Inspector and Contractor deem it to be a significant non-conforming item
- D. In every instance that an item does not meet the specification requirements
Answer: C
NEW QUESTION # 47
ISO SA 3 is directly equivalent to:
- A. NACE No. 3/SSPC SP 6
- B. NACE No. 1/SSPC SP 5
- C. None of the above
- D. NACE No. 2/SSPC SP 10
Answer: C
NEW QUESTION # 48
ISO ST 3 is described as:
- A. Thorough hand tool cleaning
- B. Thorough blast cleaning
- C. Very Thorough power tool cleaning
- D. Very Thorough hand or power tool cleaning
Answer: D
NEW QUESTION # 49
As a NACE Coating Inspector your responsibility with respect to safety is to:
- A. Assume the role of the Safety Inspector
- B. Check the PPE used by the Applicators
- C. Check the credentials of the Safety Officer on site
- D. Act in accordance with the site safety requirements and set an example
Answer: D
NEW QUESTION # 50
When applying Thermal Spray Coatings the specification is most likely to refence:
- A. SSPC PA 2
- B. NACE SP 0188
- C. SSPC-CS 23.00/AWS C2.23/NACE No. 12
- D. NACE SP 0178
Answer: C
NEW QUESTION # 51
You are the NACE Coating Inspector on an exterior job where the contractor is not using any environmental controls, For the last several hours your reading; indicate the relative humidity is rising and the substrate temperature is dropping. The sky is clouding over and the weather forecast is for evening showers. It is now 4 PM, your readings indicate you have minimally acceptable environmental conditions, however if the current trend continues, you expect to be outside specified conditions soon. The contractor advises you he is going to mix up the next full kit to complete his for the day.
Your FIRST preformed course of action is to:
- A. Advise the Contractor of your readings
- B. Advise the Contractor he can proceed
- C. Call your supervisor
- D. Advise the Contractor he cannot proceed
Answer: A
NEW QUESTION # 52
Which one of these elements is not necessary for corrosion to occur:
- A. Reference Cell
- B. Electrolyte
- C. Cathode
- D. Anode
Answer: A
NEW QUESTION # 53
SSPC SP 1 identifies the use of:
- A. Organic solvents
- B. Inorganic solvents
- C. Biodegradable detergents
- D. A wide variety of materials
Answer: D
NEW QUESTION # 54
Upon arrival of coating materials, the inspector should
- A. observe aryl document that the applicator WFT at regular intervals during application.
- B. review coating contractors' plans for storage of coating materials and confirm they meet national, local and owners' fire and environmental regulations.
- C. observe and document time frame and environmental conditions between each coat.
- D. observe and document the amount of material and batch numbers.
Answer: D
NEW QUESTION # 55
Digital hygrometers
- A. determine relative humidity, air temperature, and dew point temperature:
- B. use a thermocouple in contact with the surface to measure temperature
- C. consist of a bimetallic sensing element protected from wind gusts.
- D. are used to measure temperature from a distance.
Answer: A
NEW QUESTION # 56
A successful coating inspector must be able to
- A. advise the coating applicator on how to mix the coating.
- B. apply the coating with expert accuracy.
- C. recommend the appropriate coating technique for the job to the contractor.
- D. look for problems or issues during application.
Answer: D
NEW QUESTION # 57
Corrosion generally occurs at which of the following sites:
- A. Metallic pathway
- B. Electrolyte
- C. Cathode
- D. Anode
Answer: D
NEW QUESTION # 58
Due to a previous premature coating failure the owner has required the original coating applicator to return to remove and replace 10,000 square feet of a failed three coat system at the applicator's cost. Due to the financial implications of another failure, the owner has offered you the job as the NACE CIP Level 1 Coating Inspector and explained that he expects you to be his "insurance policy" for this job. You have never been involved in a warranty job before and are unfamiliar with the coating system.
Your preferred FIRST course of action is to:
- A. Meet with the owner and explain your limitations and concerns prior accepting the assignment
- B. Review the Product Data Sheets and meet with the Coating Applicator 'prior to the pre-job meeting
- C. Purchase Professional Liability Insurance prior to job commencement
- D. Review the Product Data Sheets, and conduct a walk thru of the job site prior to the pre-job Conference
Answer: D
NEW QUESTION # 59
Polymerization is the process of:
- A. Monomers telegraphing
- B. All organic coatings
- C. All thermoplastic coatings
- D. Monomers joining together
Answer: D
NEW QUESTION # 60
......
NACE-CIP1-001 EXAM DUMPS WITH GUARANTEED SUCCESS: https://examsboost.dumpstorrent.com/NACE-CIP1-001-exam-prep.html